Recording Mode43Sports Mode/Portrait Mode• If you record a still picture in ProgressivePhotoshot Mode, the brightness and hue of therecorded still picture may become unstable.• If this mode is used for indoors, the screen mayflicker. If so, change the [ SCENE MODE]setting to [OFF].Low Light Mode• Extremely dark scenes may not be able to berecorded with detail.Spotlight Mode• If the subject is extremely bright, the recordedimage may become whitish and the periphery ofthe recorded image extremely dark.Surf & Snow Mode• If the recording subject is extremely bright, therecorded image may become whitish.Recording in Natural Colors( White Balance)Depending on the scene or lighting conditions, theAutomatic White Balance Adjustment Mode may notbe able to bring out natural colors. In this case, thewhite balance can be adjusted manually.When the Camcorder is turned on with the Lens Capon, the Automatic White Balance Adjustment may notfunction properly. Please turn on the Camcorder afterremoving the Lens Cap.• Set to Tape/Card Recording Mode.• The [ ] Indication and the One-TouchNavigation icon appears.1 Set the [AUTO/MANUAL/FOCUS] Switch to[MANUAL].[One-Touch Navigation icon]5/5 NEXTIRIS SHTRWB2 Move the Joystick Control [▲] to select[ ].• The White Balance indication appears. ([ ]etc.)1) 2)3) 4)3 Move the Joystick Control [◄] or [►] toselect a desired White Balance Mode.BACKWB< WB>S P 3 h 5 9 m 5 9 s 2 9 fR 2 : 0 0►1 2 : 3 4 : 5 6 A MJ A N 2 2 0 0 6 1 0 0BACKWB< WB>S P 3 h 5 9 m 5 9 s 2 9 fR 2 : 0 0►1 2 : 3 4 : 5 6 A MJ A N 2 2 0 0 6 1 0 0BACKWB< WB>S P 3 h 5 9 m 5 9 s 2 9 fR 2 : 0 0►1 2 : 3 4 : 5 6 A MJ A N 2 2 0 0 6 1 0 0BACKWB< WB>S P 3 h 5 9 m 5 9 s 2 9 fR 2 : 0 0►1 2 : 3 4 : 5 6 A MJ A N 2 2 0 0 6 1 0 0BACKWB< WB>S P 3 h 5 9 m 5 9 s 2 9 fR 2 : 0 0►1 2 : 3 4 : 5 6 A MJ A N 2 2 0 0 6 1 0 01) Automatic White Balance Adjustment [ ]2) Indoor Mode (recording under incandescentlamp) [ ]3) Outdoor Mode [ ]4) The white balance setting that was previously setmanually [ ] To Resume Automatic AdjustmentMove the Joystick Control [◄] or [►] until the[ ] Indication appears. Or, set the [AUTO/MANUAL/FOCUS] Switch to [AUTO].Adjusting White Balance ManuallyWhite Balance Adjustment recognizes the colorof light and adjusts so that white will appear purewhite. The Camcorder determines the hue of lightthat comes through the Lens and White BalanceSensor, thereby judging the recording condition, andselects the closest hue setting. This function is calledAutomatic White Balance Adjustment.For light outside the functional Auto White BalanceAdjustment range, use the Manual White BalanceAdjustment Mode.• Set to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] Switch to[MANUAL].