Panasonic Digital Palmcorder PV-GS69 Operating Instructions Manual

Also see for DIGITAL Palmcorder PV-GS29: Operating instructions Operating instructions Manual

Contents

Panasonic Digital Palmcorder PV-GS69 Operating Instructions Manual Manual pdf 36 page image

363 Open the LCD Monitor or the Viewfinder.• The Red Lamp lights up and the camera will beput into recording pause approx. 1.7 secondsafter it is turned on. To Cancel the Quick StartSet [ SETUP] >> [ QUICK START] >> [OFF].• If the standby continues for approx. 30 minutes,then the Lamp (Green) will go off and theCamcorder will be completely turned off.2 While the [OFF/ON] Switch is still set to[ON], close the LCD Monitor and retractthe Viewfi nder.• The Green Lamp 1 lights up and the unit goesinto Quick Start Standby mode.Notes:• When you set [ POWER SAVE] to [5 MINUTES]and the Camcorder is left in the Recording PauseMode for 5 minutes, the unit will turn off. (GreenLED will lit up.) Close the LCD Monitor and retractthe Viewfinder. To turn the Camcorder on open theLCD Monitor and/or the Viewfinder.• If the Mode Dial is moved or the battery is removedin Quick Start standby mode, Quick Start iscanceled and the power turns off even if the [OFF/ON] Switch is set to [OFF]. (However, changing themode between Tape Recording Mode and CardRecording Mode will not cancel Quick Start.)• When the Camcorder is Quick-Started with theWhite Balance on automatic, it may take some timeuntil the White Balance is adjusted if the scenebeing recorded has a light source different from thescene last recorded. (When the MagicPix Functionis used, however, the White Balance of the scenelast recorded is retained.)• If the power is turned on in Quick Start standby, thezoom magnification becomes 5× and the picturesize may differ from what it was before Quick Startstandby.• When using the AC Adaptor, Quick Start can beused even if a tape is not inserted.1Self-timer Recording(For PV-GS39/PV-GS69)When you set the self-timer, the recording startsautomatically after 10 seconds on the Card.• Set to Card Recording Mode.1 Press the Joystick Control to display theOne-Touch Navigation icon on the lowerright of the screen.2 Move the Joystick Control [▼] until thepage with [ ] indication is displayed.1/2 NEXT[One-Touch Navigation icon]• The [ ] Indication flashes and the recordingstarts after 10 seconds. After recording, theSelf-Timer will be canceled. To Stop the Self-timer in ProgressPress the [MENU] Button.Notes:• When [ BEEP SOUND] on the [ SETUP]Sub-Menu is set to [ON], the beep sound will beemitted along with the Recording Lamp flashing inthe Self-timer Standby Mode.• By operating the [OFF/ON] Switch or Mode Dial,the Self-timer Standby Mode is canceled.• If the RapidFire Consecutive Photoshot is set, themaximum recordable pictures (max. 10 pictures)are recorded. (p. 34)3 Move the Joystick Control [◄] to select[ ].• The [SELF-TIMER ON] and the [ ] Indicationappears.4 Press the [PHOTO SHOT] Button. To Cancel the Self-timerMove the Joystick Control [◄] to select [ ] again.• The [SELF-TIMER OFF] is displayed.