84ª Changing the Counter Display ModeBy changing [C.DISPLAY] on the[DISPLAY SETUP] Sub-Menu, you can change theCounter Display Mode to Tape Counter Indication(0:00.00), Memory Counter Indication (M0:00.00),and Time Code Indication (0h00m00s00f).≥You can also press the [COUNTER] Button of theRemote Controller repeatedly to change theCounter Indication.ª Displaying Date/Time IndicationTo display Date/Time Indication, set the appropriateDate/Time in [DATE/TIME] on the[DISPLAY SETUP] Sub-Menu.≥You can also press the [DATE/TIME] Button onthe Remote Controller repeatedly to display orchange the Date/Time Indication.ª Changing the Display ModeBy changing [DISPLAY] on the [DISPLAY SETUP]Sub-Menu, Counter Display Mode changes to AllFunction Display, Partial Display, and MinimumDisplay.~~~~~~~~~~~~~~~~Initializing the ModesYou can change the Menu settings back to theshipping condition.1 Set [CAMERA FUNCTIONS] >>[OTHER FUNCTIONS2] >> [INITIAL SET]>> [YES].≥The initializing takes a while.≥After the initializing is completed, the[COMPLETED] Indication appears with beeps.≥Initializing will not erase the clock setting thathas been adjusted.~~~~~~~~~~~~~~~~Warning/Alarm IndicationsIf any one of the following indications lights up orflashes, please check the condition of thePalmcorder.EJECT TAPE: After the [DEW DETECTED]Indication appears, eject theCassette.Y CHECK REC TAB :The erasure prevention tab on theinserted Cassette is open (that is,set to [SAVE]).When you are attempting to doaudio dubbing on the unrecorded(blank) portion of the tape, or youare attempting to do dubbing on theCassette whose tab is set at[SAVE]. (l 51, 68)Y TAPE NOT INSERTED:No Cassette is inserted. (l 20)X LOW BATTERY MODE:The Battery is low. Recharge it.(l 18)0: The internal lithium battery is low.(l 27)2 END/TAPE END:The tape ended during recording.REMOTE/CHECK REMOTE MODE:Wrong Remote Controller Mode hasbeen selected. (l 17)CANNOT REC LP-MODE:Because the original recording wasdone in LP Mode, audio dubbingcannot be performed. (l 51)INCOMPATIBLE DATA:This Cassette is incompatible orcontains copy-guard.Because the medium is protectedby a copy guard, images cannot berecorded correctly.°: If this Indication appears, return theLCD Monitor to the original positionin order to check the specificcontent of the Warning/AlarmIndication.AV INPUT RECORDING:When you are attempting to recordon the Memory Card during dubbing(l 67) on the Cassette.NO CARD: There is no Memory Card inserted.PLEASE WAIT:When reading of the Memory Card(playback, format, when using theMulti-Picture Function). (l 57, 66)CARD ERROR:The Memory Card is not compatiblewith the Palmcorder.CHECK SELECT SWITCH:You are attempting to record a tapein VCR Mode, with the combinationof modes set with the [TAPE/CARD/CARD MODE] Selector, thisIndication appears. Pressing theRecording Start/Stop Button with[PICTURE] in Camera Mode.Pressing the PhotoShot Button with[MPEG4] or [VOICE] in CameraMode. Pressing the RecordingStart/Stop Button with [TAPE] and[PICTURE] in Card Playback Mode.Pressing the PhotoShot Button with[PICTURE] in Card Playback Mode.
