Chapter 2Getting Started 153 Scroll to Vibration and press (OK).• If selected, the vibration alert icon ( ) appearson the display.4 To change the setting, scroll to the other option and press (OK).Using the Private Handsfree HeadsetWhen the Private Handsfree Headset is plugged into the phone, you canhave a phone conversation without holding the phone to your ear. Theother person’s voice is heard through the Private Handsfree Headset’searpiece. When you speak, your voice is picked up by the PrivateHandsfree Headset’s microphone.Note: Before attaching the Private Handsfree Headset, removethe plug from the headset/TTY connector at the bottom left sideof your phone. Store the plug in a safe place so you will be ableto cover the connector when necessary.Attach the Private Handsfree Headset to your phone as shown.1 Securely plug the Private Handsfree Headset jack in the side of thephone. This will automatically disable the speaker and microphone inthe phone.2 Attach the Private Handsfree Headset clip to your clothes.3 Insert the earpiece into your ear.4 During conversation, increase or decrease volume to a comfortablelevel by pressing or on the phone’s center navigation key.5 The microphone picks up your voice from its hanging position.Note: Once the Private Handsfree Headset is connected, youcan customize the ring volume, key volume, and voice volumesettings for handsfree use. Ring volume and key volume can bechanged in the Tone Settings menu. Voice volume can becustomized during conversation as indicated above. When youdisconnect the Private Handsfree Headset, your phone will goback to the settings programmed for standard handheld use.