Panasonic ET-YFB100G Operating Instructions Manual

Contents

Panasonic ET-YFB100G Operating Instructions Manual Manual pdf 21 page image

ConnectionsENGLISH - 21Connecting to the DIGITAL LINK compatible device▶■ ConnectionsDIGITAL LINKcompatible projectorThe twisted-pair-cablereceiver of other manufacturerNames of the DIGITAL LINKterminals may be different foreach manufacturer.Not DIGITAL LINKcompatible projectorHDMI cable(commercially available)When connecting to the DIGITAL LINKcompatible projectorWhen connecting to the projector that is notDIGITAL LINK compatible*Attentionz When connecting to the projector using the twisted-pair-cable receiver of other manufacturer, do not useanother twisted-pair-cable transmitter between the twisted-pair-cable receiver of other manufacturer and theprojector.The images and sounds may be interrupted or become unstable.z Do not use the switching hub between the interface box and DIGITAL LINK compatible projector, and betweenthe interface box and twisted-pair-cable receiver.z Request the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work isnot properly conducted, the cable transmission characteristics do not meet, and the images and sounds maybe interrupted or become unstable.z Use the cable that conforms with the following conditions.• Compatible to the CAT5e or a higher standard• Shield type (including the connector)• Straight wire connection• Single wirez When installing the cable, confirm that the cable specification satisfies the characteristics of CAT5e or higherby using a cable tester or a cable analyzer.When a relay connector is used in the middle, measure in a condition that the relay-connector is included.z The interface box becomes easier to get affected by the internal noise, as well as the external noise. Therefore,install and use the cable without being wound as much as possible.z Do not pull the cable with a strong force. In addition, do not bend or fold forcedly.z Do not bind with other cables, especially the power cable. Keep the distance from other parallely set cables asfar as possible.z When connecting the interface box to the DIGITAL LINK compatible projector, open the DIGITAL LINK statusmenu of the projector after connecting the cable. Confirm that the signal quality is -12 dB or lower.