Panasonic EY7460 Operating Instructions Manual

Also see for EY7460 - DRILL DRIVER 21.6V: Service manual Operating instructions Service manual Parts list Operating instructions

Contents

- 15 -3. During charging, the charging lamp willbe lit.When charging is completed, an internalelectronic switch will automatically betriggered to prevent overcharging.● C h a r g i n g w i l l n o t s t a r t i f t h ebattery pack is warm (for example,i m m e d i a t e l y a f t e r h e a v y - d u t yoperation).The orang e standby lamp will beflashing until the battery cools down.Charging will then begin automatically.4. The charge lamp (green) will flashslowly once the battery is approximately80% charged.5. When charging is completed, thecharging lamp in green color will turn off.6. If the temperature of the battery packis 0°C or less, charging takes longer tofully charge the battery pack than thestandard charging time.Even when the battery is fully charged,it will have approximately 50% of thepower of a fully charged battery atnormal operating temperature.7. Consult an authorized dealer if thecharging lamp (green) does not turn off.8. If a fully charged battery pack isinserted into the charger again, thecharging lamp lights up. After severalminutes, the charging lamp in greencolor will turn off.9. Remove the battery pack while thebattery pack release button is held up.Alignment marksBattery packrelease buttonLAMP INDICATIONSCharging is completed. (Full charge.)Battery is approximately 80% charged.Now charging.(Green)Turn off Lit Flashing(Orange)Charger is plugged into the AC outlet. Ready to charge.Charging Status Lamp.Left: green Right: orange will be displayed.Battery pack is cool.The battery pack is being charged slowly to reduce the load on the battery.Battery pack is warm.Charging will begin when temperature of battery pack drops. Ifthe temperature of the battery pack is -10° or less, the chargingstatus lamp (orange) will also start flashing. Charging will beginwhen the temperature of the battery pack goes up.Charging is not possible. Clogged with dust or malfunction ofthe battery pack.