Panasonic EY7460 Operating Instructions Manual

Also see for EY7460 - DRILL DRIVER 21.6V: Service manual Operating instructions Service manual Parts list Operating instructions

Contents

- 16 -Information for Users on Collection and Disposal of OldEquipment and used BatteriesThese symbols on the products, packaging, and/or accompanyingdocuments mean that used electrical and electronic products and batteriesshould not be mixed with general household waste.For proper treatment, recovery and recycling of old products and usedbatteries, please take them to applicable collection points, in accordancewith your national legislation and the Directives 2002/96/EC and 2006/66/EC.By disposing of these products and batteries correctly, you will help to savevaluable resources and prevent any potential negative effects on humanhealth and the environment which could otherwise arise from inappropriatewaste handling.For more information about collection and recycling of old products andbatteries, please contact your local municipality, your waste disposalservice or the point of sale where you purchased the items.Penalties may be applicable for incorrect disposal of this waste, inaccordance with national legislation.For business users in the European UnionIf you wish to discard electrical and electronic equipment, please contact your dealer orsupplier for further information.[Information on Disposal in other Countries outside theEuropean Union]These symbols are only valid in the European Union. If you wish to discard theseitems, please contact your local authorities or dealer and ask for the correct method ofdisposal.Note for the battery symbol (bottom two symbol examples):This symbol might be used in combination with a chemical symbol. In this case itcomplies with the requirement set by the Directive for the chemical involved.V. MAINTENANCE● Use only a dry,soft cloth for wiping the unit.Do not use a damp cloth,thinner,benzine,orother volatile solvents for cleaning.● In the event that the inside of the tool or battery pack is exposed to water,drain and allowto dry as soon as possible.Carefully remove any dust or iron filings that collect inside thetool. If you experience any problems operating the tool,consult with a repair shop.VI. ACCESSORIESUse only bits suitable for size of drill's chuck.