7.1 Remote Programming7-37.1.2 Operation of Tool SoftwareThis section describes the procedure for performing remote programming from FPWIN GR7.PROCEDURE1. Select “Online” > “Communication Settings” from the menu bar.The “Communication Settings” dialog box is displayed.2. Select a slot number (MEWNET/ET-LAN) and slot number of the home unitin which the FP7 MW Unit is installed.3. Select the unit number of a PLC to be remotely programmed.4. Press the [OK] button.The slot number and unit number of the connected communicating unit isdisplayed on the right side of the status field. After that, remote programmingoperation can be performed for the communicating unit, such asuploading/downloading projects, monitoring devices, and monitoringstatuses.
