Panasonic FZ-Y1 series Operating Instructions Manual

Also see for FZ-Y1 series: Operating instructions Operating instructions Operating instructions

Contents

32Appendix*1 1 MB = 1,048,576 bytes/1 GB = 1,073,741,824 bytes*2 Memory size of the factory default depends on the model.*3 Graphics processing unit with a local memory controller interface and local graphics-specific memory isimplemented.*4 1 MB = 1,000,000 bytes/1 GB = 1,000,000,000 bytes. Your operating system or some application software willreport as fewer GB.*5 Selectable resolution depends on the specifications of the external display. Display may be impossible usingsome connected external displays.*6 Only when connected to Cradle (optional).DRM(Digital Rights Management) contents are not available through HDMI connector of Cradle.*7 Some devices cannot be used depending on the port type.*8 Does not guarantee operation of all Bluetooth peripherals.*9 On the Start screen, touch the [Manual Selector] tile, and select “Installation Manual for Trusted PlatformModule (TPM)”.*10 Compatible for ISO 7816.*11 This slot is compatible with UHS-Ι / UHS-ΙΙ. Operation has been tested and confirmed using Panasonic SDMemory Card with a capacity of up to 2 GB, Panasonic SDHC Memory Card with a capacity of up to 32 GB,and Panasonic SDXC Memory Card with a capacity of up to 64 GB.Operation on other SD equipment is not guaranteed.*12 Does not guarantee operation of all USB-compatible peripherals.*13 This port is compatible with 4K60p and HDCP 2.2. Input video cannot be imported. Input video cannot bedisplayed on the external displays.Does not guarantee operation of all HDMI-compatible peripherals.*14 The AC adaptor is compatible with power sources up to 240 V AC adaptor.The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a125 V AC compatible AC cord. 20-M-1*15 Measured at LCD brightness: 60 cd/m2Varies depending on the usage conditions, or when an optional device is attached.*16 Varies depending on the usage conditions.*17 Approx. 0.5 W when the battery is fully charged (or not being charged) and the computer is OFF.Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3 W) simply byhaving the AC adaptor plugged into an AC outlet.*18 Rated power consumption 23-E-1*19 Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installedby using the flash memory recovery and the recovery disc.*20 Must be installed before use.*21 In this manual, the “Aptio Setup Utility” is referred to as “Setup Utility”.*22 Perform on the recovery disc.*23 These are speeds specified in IEEE802.11a+b+g+n+ac standards.Actual speeds may differ.*24 Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.Only available when HT40 enabled by the computer and access point which associated supports HT40.Specifications