11 (E)Manual shootingww Manually adjusting the focusThe lens focus can be adjusted manually.1 Press the [M/FOCUS] button to switch thefocus to manual adjustment.2 Press the [F] or [N] button of [FOCUS], andadjust the focus.When the [F] button is pressed, the focus moves furtheraway (far); conversely, when the [N] button is pressed, itmoves nearer (near).The speed of focusing and other adjustments canbe switched to fast or slow by pressing the [FAST] or[SLOW] button, respectively.3 If necessary, press the [A/FOCUS] button toreturn the focus to the automatic adjustment.wp When the focus is set to manual, the subject maygo out of focus during panning, tilting and zooming.Therefore, the unit comes with a function whichcompensates for this. (Focus compensation duringzooming function: Focus ADJ With PTZ.)This function was set to ON at the factory.If the function has been set to OFF, either adjust thefocus, as required, after zooming or set the focus toauto. (See page 26.)Noteww Manually adjusting the irisThe lens iris can be adjusted manually.1 Press the [M/IRIS] button to switch the iris tomanual adjustment.2 Adjust the iris using the [IRIS +] or [IRIS –]button.Press the [IRIS +] button to adjust the lens iris in theopening direction; conversely, press the [IRIS –] buttonto adjust the lens iris in the closing direction.3 If necessary, press the [A/IRIS] button to returnthe iris to the automatic adjustment.