Panasonic GP-VD151 Operating Instructions Manual

Also see for GP-VD150: Operating instructions Brochure & specs

Contents

Panasonic GP-VD151 Operating Instructions Manual Manual pdf 22 page image

21 (E)Setting the menu itemsww Picture 1/2 screenPicture 1/2Chroma Level -1AWB Mode AWB AR Gain 0B Gain 0Detail LowFlesh Tone Mode OffDNR HighReturnChroma Level [–3 to +3]Set here is the color intensity (chroma level) of theimages.AWB Mode [ATW, AWB A, AWB B]The white balance mode is selected here.Select the mode when the coloring is not natural becauseof the nature of the light source or other factors.If the white color serving as the reference can berecognized, subjects can be shot with natural coloring.ATW: In this mode, the white balance is compensatedfor automatically, even if changes occur in thelight source or color temperature, by a process ofcontinuous and automatic adjustment.AWB A, AWB B:When AWB A or AWB B is selected and thewhite balance is executed, the adjustment resultsobtained are stored in the memory selected.When AWB A or AWB B is then selected, the whitebalance stored in the selected memory can berecalled.R Gain, B Gain [–30 to +30]When “AWB A” or “AWB B” has been selected as theAWB Mode setting, the white balance can be finelyadjusted upon completion of the automatic white balance(AWB) adjustment.Detail [Off, Low, High]The image detail (image sharpness) is adjusted here.When “Low” or “High” is selected, the detail is enhanced.Flesh Tone Mode [Off, Low, High]Set here is the flesh tone mode for displaying thesubjects’ skin so that it appears more smoothly andeye-pleasingly.When “Low” or “High” is selected, the effect is enhancedeven more.DNR [Off, Low, High]Set here is the level of the digital noise reduction effect sothat light, noise-free and clear images will be output evenat night and in other low-brightness environments.When “Low” or “High” is selected, even more noise canbe eliminated.However, there is an increased possibility thatafterimages may occur.ReturnUse this to return to the previous menu.wp When the automatic white balance (AWB) adjustment isperformed, the R Gain and B Gain values return to “0”.wp When “AWB A” or “AWB B” has been selected as theAWB Mode setting, the R Gain and B Gain adjustmentvalues can be stored in the two memories (A and B).wp When new values are set, the previous data is deleted.Use one memory for one set of shooting conditions andthe other memory for another set of shooting conditions.wp In registering data in the preset memories, the R Gainand B Gain settings (-30 to +30) are not stored, but thewhite balance (color) statuses that are established afteradjustments have been made using R Gain and B Gaincan be stored.wp If Mode A has been selected as the Preset Scopesetting, the R Gain and B Gain settings will return to “0”when the data in the preset memories is recalled.wp When ATW has been selected as the AWB Modesetting, R Gain and B Gain cannot be adjusted.Notes