Panasonic GP-VD151 Operating Instructions Manual

Also see for GP-VD150: Operating instructions Brochure & specs

Contents

Panasonic GP-VD151 Operating Instructions Manual Manual pdf 14 page image

13 (E)Preset memoriesThis unit enables up to 12 settings for the camera direction(panning and tilting), zoom, focus, iris, gain and whitebalance to be registered in its preset memories, and called.wp The operating mode (manual or auto setting) is notregistered for the focus and iris settings.The current focus and iris values are registered.wp The focus and iris values can be recalled only when themanual settings are applicable.wp AWB A, AWB B or ATW is registered as the whitebalance setting. The values selected when AWB wasestablished are recalled as the adjustment values ofAWB A or AWB B.wp When there is a large difference in the environmentaltemperature between the time of registration and thetime the setting is called, displacement of the presetposition may occur.wp If displacement occurs, perform registration again.wp While preset settings are being called, it is notpossible to perform manual operations such aspanning, tilting, zooming or iris adjustments.wp If, when one set of preset settings has been called,another set of preset settings is then called, the firstset of preset settings which have been called will takeprecedence.NotesTwelve settings (preset No.1 to No.12) can be registered andcalled using the wireless remote controller.The [1] to [12] buttons correspond to the unit’s presetmemories No.1 to No.12.wq Registering the settings in the preset memories1 Display the picture to be shot on the monitor.Operate the pan, tilt or zoom buttons to determine thecamera angle.Adjust the focus, iris, gain and white balance if theyneed to be adjusted.2 While holding down the [PRESET] button,press the button corresponding to the presetmemory number.wp If a preset memory number with an alreadyregistered setting has been selected, the existingsetting will be erased and replaced with the new one.wq Calling the settings of the preset memories1 Press the button in which the preset memorysetting has been registered.