Panasonic GP-X Series User Manual

Also see for GP-X SERIES: Specifications Instruction manual Instruction manual User manual

Contents

139Chapter 88.1.2 ControllerMaterialPower supply line: 1,000Vp, 10ms cycle, 0.5 s pulse widthRadiation: 300Vp, 10ms cycle, 0.5 s pulse width (with noise simulator)Noise immunityGP-XC22KL-P GP-XC3SE-P GP-XC5SE-PGP-XC22KL GP-XC3SE GP-XC5SEShort-circuitprotectionComparison outputAlarm outputStrobe output0.075ms (Fastest)0.02% F.S. (64 times average processing) 0.04% F.S. (64 times average processing)Within 0.3% F.S.Response timeTemperaturecharacteristic (Note 4)Linearity (Note 3)Resolution (Note 3)Output voltage: 5 to 5V (Note 2)Output impedance: 100 approx.150mA or lessPNP output GP-XC3S-P GP-XC5S-P GP-XC8S-P GP-XC10M-P GP-XC12ML-P24V DC 10% Ripple P-P 10% or lessSupply voltageCurrent consumptionAnalog voltage outputGP-XC3S GP-XC5S GP-XC8S GP-XC10M GP-XC12MLNPN outputSet model name(Note 1)ItemATA4811 (Controller mounting bracket): 1 setAccessoryEnclosure: PolycarbonateFloating earthGrounding method5 digit green LED (display of numerical values within the upper and lower limit value)5 digit orange LED (display of numerical values out of the upper and lower limit value)Upper line digital indicator partLower line digital indicator partIndicator Orange LED (lights up in mode status)Orange LED (lights up when the upper value is exceeded)Green LED (lights up when within the upper and lower limit value)MODEHIGOGreen LED (lights up as per the external or internal trigger timing)TIMINIGPush button setting/External input setting40kHz (25 s)Sampling frequencyZero-set setting methodExter nal inputIncorporated120g approx.Weight0 to 50 (No dew condensation), Storage: 0 to 5035 to 85%RH, Storage: 35 to 85%RH10 to 55Hz frequency, 0.75mm amplitude in X, Y and Z directions for two hours each100m/s 2 acceleration (10G approx.) in X, Y and Z directions five times eachAmbienttemperatureAmbienthumidityVibration resistanceShock resistanceEnvironmental resistanceOrange LED (lights up when less than the lower limit value)LOPhotocoupler inputInput current: 9mA or lessOperating voltage: ON voltage 17V or more(between 0V and input)OFF voltage 4V or less(between 0V and input)Input impedance: 5k approx.Photocoupler inputInput current: 9mA or lessOperating voltage: ON voltage 17V or more(between 24V and input)OFF voltage 4V or less(between 24V and input)Input impedance: 5k approx.NPN open-collector transistorMaximum sink current: 100mAApplied voltage: 30V DC or less(between output and 0V)Residual voltage: 1.6V or less(at 100mA sink current)0.4V (at 16mA sink current)PNP open-collector transistorMaximum source current: 100mAApplied voltage: 30V DC or less(between output and V)Residual voltage: 1.6V or less(at 100mA source current)0.4V (at 16mA source current)0.07 /F.S./ or lessNotes: 1)2)3)4)GP-XC3S (-P)and GP-XC5S (-P) is applicable to export regulations specified in "Foreign Exchange and Foreign TradeControl Law". Exportation of the 3S or 5S type or carrying it outside Japan requires an export permit from the Japaneasegovernment. However, GP-XC3SE and GP-XC5SE type which are not applicable to export regulations are also available.The factory shipment setting is between 0 and +5V in the detection range.Value at constant +25The value is in the range from 20 to 60% of the maximum detection distance with a combination of sensor headand controller.