30Chapter 2Setting ModeWhen the key is pressed, the MODE indicator (orange) lights up tostart the setting mode.At this time, the controller continues sampling, measurement and judgment.Press the or key to change the setting of major items.Section "3.1 Memory Selection"Section "3.2 Upper and Lower LimitValue Settings"Section "3.2 Upper and Lower LimitValue Settings"Section "3.3 Averaging FrequencySetting"Section "3.4 Setting According toApplication (Application mode)"Section "3.5Trigger Input Setting"Section "4.1 Selection of Object to BeDetected" to section "4.9 Initializationto Factory Shipment Setting"Section "5.1 RS-232C CommunicationSetting" to section "5.4 Sensor HeadReplacement Setting"Memory numberselection P.46P.48P.48P.51P.52P.63P.70 to94P.98 to108Upper limit settingLower limit settingAveragingfrequency settingApplication modesettingSetting 1: DetailsettingSpecial settingSection "2.3 Measurement Function"Section "3.5 Trigger Input Setting"Section "3.6 Comparison withPrevious Mean"P.32P.63P.66HoldingmeasurementselectionTrigger selectionComparison withprevious averageReference item ReferencepageDisplay Name
