6.3 GT02L6.3.1 General Specifications (GT02L)Item SpecificationsRated voltage 5 V DCOperating voltage range 4.5 to 5.5 V DCPower consumption 1W or less (200 mA or less) Note1)Ambient temperature 0 to +50 °CAmbient humidity 20 to 85% RH (at 25 °C, non-condensing)Storage temperature -20 to +60 °CStorage humidity 10 to 85% RH (at 25 °C, non-condensing)Breakdown voltage Between [power supply terminals] and [case]500 V AC for 1 minute, Cutoff current 10mA (at default setting)Insulation resistanceBetween [power supply terminals] and [case]100 MΩ or more, 500 V DC, measured with megohmmeter (at defaultsetting)Vibration resistance5 to 8.4 Hz half amplitude 3.5 mm,8.4 to 150 Hz acceleration 9.8 m/s2 ,10 sweeps each in X, Y and Z directions (1 octave/min)Shock resistance 147 m/s 2 , 3 times on 3 axesEC Directive applicable EN61131-2 (EMC Directive)Noise immunity 1000 V [P-P] or more, Pulse width 50 ns, 1μs between power supplyterminals (based on in-house measurements) Note2)Protective constructionIP65 (Initial value, evaluated by us)Dustproof and drip-proof from front panel only (packing used on panelcontact surface) Note3)Weight Approx. 150 gNote1) When supplying the power from the TOOL port of a PLC (CPU unit), comfirm the PLC restrictionssuch as the power supply capacity before use.Note2) When using our exclusive cable.Note3) When reattaching, replace waterproof packing.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
