Ethernet port (GT32T1 only)Item SpecificationsGT32T1Communication standard IEEE802.8u/100BASE-TX IEEE802.3/10BASE-T Note1)Connector shape Plug-in phone jack Note2)Transmission distance Max. 100 mApplicable cable UTP cable (Unshielded wire) Category 5 Note3)Auto MDI-X SupportedSPEED lamp Light on: During 100BASE-TX communicationBlinking: During 10BASE-TX communicationLINK/ACT lamp Light on: When linkedBlinking: During data reception.Note1) Data processing in the main unit is carried out with the serial communication of 115.2 kbps.Note2) Take care of handling of the connector not to add an excessive static electricy on the metal partof the connector.Note3) Do not use a STP cable (shielded wire).Note4) Ethernet is a trademark of Zerox Corporation, USA.Note5) Simultaneous communication with the USB port is not achievable.SD memory card slotItem SpecificationsSupport media SD memory card, SDHC memory card Note1)Supported format standard Conforms to SD standard Note2)Note1) The manufacturer name that the operation check has done: Panasonic CorporationUsable capacity of a SD memory card varies according to the version of GT firmware.Note2) Please format with a format software for SD memory cards.Note3) The SD access lamp turns on while acccessing the SD memory card.6.8.5 Sound Output Specifications (GT32T1 Only)Item SpecificationsGT32T1File format WAV format (PCM format, sampling 8 KHz, 16 bits monoral)Max. sound data capacity 512 kbytes (Approx. 30 seconds)Max. registered No. ofsound data 128Sound output voltage 2 Vp-pOutput terminal φ3.5 stereo mini jackConnecting amplifier Input impedance 10 kΩ or morePhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net