Panasonic GT01 User Manual

Also see for GT01: Specifications Brochure & specs Manual User manual

Contents

Safety PrecautionsObserve the following notices to ensure personal safety or to prevent accidents.To ensure that you use this product correctly, read this User’s Manual thoroughly before use.Make sure that you fully understand the product and information on safety.This manual uses two safety flags to indicate different levels of danger.WARNINGIf critical situations that could lead to user’s death or serious injury is assumed bymishandling of the product:- Always take precautions to ensure the overall safety of your system, so that the wholesystem remains safe in the event of failure of this product or other external factor.- DO NOT USE THE PROGRAMMABLE DISPLAY TO CONTROL SAFETY FEATURES OROTHER CRITICAL OPERATIONS OF EQUIPMENT OR SYSTEMS. A COMMUNICATIONERROR (FOR ANY REASON) MIGHT PREVENT SUCH SAFETY FEATURES ORCRITICAL OPERATIONS FROM FUNCTIONING PROPERLY.- Do not use this product in areas with inflammable gas. It could lead to an explosion.- Exposing this product to excessive heat or open flames could cause damage to the lithiumbattery or other electronic parts.- Battery may explode if mistreated. Do not recharge, disassemble or dispose of fire.CAUTIONIf critical situations that could lead to user’s injury or only property damage isassumed by mishandling of the product.- To prevent excessive exothermic heat or smoke generation, use this product at the valuesless than the maximum of the characteristics and performance that are assured in thesespecifications.- Do not dismantle or remodel the product. It could cause excessive exothermic heat or smokegeneration.- Do not touch the terminal while turning on electricity. It could lead to an electric shock.- Use the external devices to function the emergency stop and interlock circuit.- Connect the wires or connectors securely.The loose connection could cause excessive exothermic heat or smoke generation.- Do not allow foreign matters such as liquid, flammable materials, metals to go into the insideof the product. It could cause excessive exothermic heat or smoke generation.- Do not undertake construction (such as connection and disconnection) while the powersupply is on. It could lead to an electric shock.- The control force of the touch switches should be less than the specification of the product.Failure to do so could lead to a damage to the product or a personal injury.- These touch switches operate using analog resistance membrane. Do not press more thanone point on the screen at a time. Doing so might operate a switch located in the middle ofthe points pressed if one exists, and could lead to a damage to the facility or an accident.Copyright / Trademarks- This manual and its contents are copyrighted.- You may not copy this manual in whole or part, without written consent of Panasonic ElectricWorks SUNX Co., Ltd.- Windows is a registered trademark of Microsoft Corporation in the United States and othercountries.- Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corp.- SDHC logo and SD logo are trademarks.- All other company names and product names are trademarks or registered trademarks oftheir respective owners.POT_GTPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net