- 140 -Connecting this unit to a DLNA-compatible device via Wi-Fi, you can play back scenes and stillpictures on the device.A DLNA-compatible Device1 Press Wi-Fi button.2 Touch [DLNA Play].≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ If you touch [CANCEL], the Wi-Fi connection is canceled.≥ When the connection is complete, the screen of this unit turns off. To display it again, touch thescreen.3 Select this unit (SSID) by the TV side.≥ Select the media (SD/MEM) and select the motion picture (AVCHD) or still picture (JPEG) toplayback.4 Perform playback operations with the TV remote control.≥ Playback operations may differ depending on the TV in use.≥ The following operations can be performed if a color button ispushed.Blue/Red: Skip playback≥ Fast forward/Fast rewind playback cannot be performed.≥ You cannot perform playback operations with this unit.To exit the playback on the TV:Touch [EXIT] or Press Wi-Fi button.≥ A message is displayed. Touch [YES] to exit.≥ Scenes recorded in iFrame/MP4 cannot be played back.≥ Depending on the TV used, it may not playback in AVCHD picture quality even when the scenerecorded in AVCHD is played back.Wi-Fi [HC-V520]/[HC-V520M]DLNA Play≥ Before using, perform the preparations for using the Wi-Fi function. (l 121)≥ Please read the operating instructions for the TV about connecting TV to the wirelessaccess point.≥ Do not remove the SD card in playing back on a TV.(Examples of operations duringmotion picture playback)A Skip playbackB StopC Playback/Pause
