- 63 -Switch the picture quality and recording format of the motion pictures to record.*1 Recording will have higher quality in the order of [PH], [HA], [HG] and [HE].*2 This option allows you to record in 1080/60p (1920k1080/60 progressive), which is the highestpicture quality for this unit.*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended for when using a Mac.≥ Recordable time using the battery (l 12)≥ This function’s default setting is [HG] mode.≥ Please refer to page 186 for details about approximate recordable time.≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.It is possible to continuously record motion picture to an SD card when there is no space availablein the built-in memory. (It allows you to record only to SD card from built-in memory.)≥ Set [MEDIA SELECT] to [Built-inMemory].≥ Set [REC MODE] to [PH], [HA], [HG], [HE] or [1080/60p].≥ Insert an SD card.≥ is displayed on the screen. will disappear when space in the built-in memory is goneand the recording to the SD card starts.≥ Relay Recording can only be performed once.≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] intothe SD card. (l 96, 104)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform Relay Recording by touching[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.≥ Still pictures are recorded to the SD card after Relay Recording.≥ is displayed on the thumbnail display during the playback of the scene that was relay-recorded on the built-in memory.[REC MODE]: [RECORD SETUP] # [REC MODE] # desired setting[PH]/[HA]/[HG]/[HE] *1 : Set the recording format to 1080/60i.[1080/60p] *2 : Set the recording format to 1080/60p.[iFrame] *3: Set the recording format to iFrame.[RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON]MENUHC-V520MMENU
