- 153 -Connecting to a wireless access pointCheck if the wireless access point you are using is compatible with WPSj If the wireless access point is compatible with WPS:Proceed to the following [WPS Connection]j If the wireless access point is not compatible with WPS:[Searching for wireless access points to set up a connection] (l 154)1 Press Wi-Fi button.≥ When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], andproceed to step 5.2 Touch [Wi-Fi Setup].3 Touch [Wireless Settings].4 Touch a Blank row.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Wireless Settings] on page 162.5 Touch [WPS Connection].6 Set the wireless access point to waiting for WPS.≥ For further details, please read the operating instructions for thewireless access point. (When using a tethering connection, pleaseread the operating instructions for the smartphone.)≥ A message is displayed when the connection is complete.≥ A message is displayed when the connection attempt fails. Touch[EXIT], and set the connection again.Enter a PIN code to set the Wi-Fi connection1 Touch [PIN code] in Step 6.2 Touch the wireless access point to be connected.≥ If you touch [Refresh], you can search for wireless access points again.3 Touch [ENTER].4 Enter the PIN code displayed on this unit screen into the wireless accesspoint.≥ For further details, please read the operating instructions for the wireless access point. (Whenusing a tethering connection, please read the operating instructions for the smartphone.)5 Touch [NEXT].≥ A message is displayed when the connection is complete.≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connectionagain.[WPS Connection]A [Delete]B [ENTER]
