- 22 -≥Open the lens cover before turning on the unit. (l 9)1 Open the LCD monitor, and set thisunit to Motion Picture RecordingMode. (l 17)2 Press the recording start/stopbutton to start recording.3 Press the recording start/stopbutton again to pause recording.≥ Recording can also be started/stopped by touching the recording button icon.∫ Screen indications in the Motion Picture Recording Mode≥ Screen display will disappear when no touch operation is performed for a specific period of time.To display it again, touch the screen. (l 30)≥ It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.≥ If the recording/playback button is pressed during motion picture recording, the recordingwill stop and this unit will be switched to Playback Mode.≥ To change the recording format, change the [REC FORMAT] or [REC MODE]. (l 69, 70)≥ Still pictures can be recorded while recording the motion picture. (l 25)≥ The images recorded between pressing the recording start/stop button to start recording andpressing it again to pause recording become one scene.When you record with the [REC FORMAT] set to [MP4/iFrame], the scenes longer thanapproximately 20 minutes will be automatically divided. (Recording will continue.)BasicRecording motion picturesRecording modeR 1h20mApproximate remaining recordable time≥ When the remaining time is less than1 minute, R 0h00m flashes red.0h00m00sRecording time elapsed≥ “h” is an abbreviation for hour, “m” forminute and “s” for second.≥ Each time the unit is put into recordingpause, the counter display will be resetto 0h00m00s.HC-V250TWA When you begin recording, ; changesto ¥.B Recording button icon0h00m00s0h00m00s0h00m00sR 1h20mR 1h20mR 1h20m
