- 155 -≥ When connecting by [Manual Setting], confirm the SSID (Identification name), Authenticationmethod, Encryption type, and Encryption key (Password) of the wireless access point you areusing.1 Press Wi-Fi button.≥ When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], andproceed to step 5.2 Touch [Wi-Fi Setup].3 Touch [Wireless Settings].4 Touch a Blank row.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Wireless Settings] on page 162.5 Touch [Manual Setting].6 Touch [INPUT], then enter the SSID of thewireless access point to connect.≥ For details on how to enter characters, refer to page 87.≥ When the entry is complete, touch [Enter].7 Touch the desired Network Authentication method.≥ When [WEP] is selected, proceed according to step 9.8 Touch the desired Encryption method.≥ If you select [NONE], a message is displayed after completing the connection.9 (When selecting [WEP]/[TKIP]/[AES])Touch [INPUT], then enter the Password.≥ For details on how to enter characters, refer to page 87.≥ When the entry is complete, touch [Enter].≥ A message is displayed when the connection is complete.Setting up a connection manuallyNetwork authentication type Encryption types that can be set[Open] [NONE]/[WEP][WEP] There is no setup of an encryption types.[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenA [Delete]B [ENTER]
