- 52 -Endless Loop Recording≥ Insert an SD card.≥ Change the Recording Mode to . (l 43)1 Select sound in loop recording setting.2 Start recording.≥ Once you start recording, the scene will be automatically divided every 2 minutes. The dividedscenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to30 scenes will be saved.)≥ When the period between the time you start recording and the time you stop recording is longerthan 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recordingwill be saved. The part before the 1 hour part will be deleted.≥ Recording stops automatically when approximately 24 hours have passed since the start of therecording.≥ During recording, the blinks.≥ The remaining recordable time and elapsed recording time are not displayed. (l 22)≥ Only when sound in loop recording is set to [ON], (microphone input level meter) isdisplayed.To switch sound in loop recordingThe menu can be set to switch to sound in loop recording.≥ Still pictures cannot be taken.≥ [REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720].≥Image Stabilizer Function is set to (setting canceled) and Level Shot Function is set to off.Image Stabilizer Function is set to (setting canceled).≥ Endless Loop Recording is not possible in the following cases:j When the SD card is not insertedj When the approximate remaining recordable time on the SD card is less than 1 hour(The time between R 0h00m and R 0h59m flashes red.)≥ Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient toplay back loop-recorded scenes by date. (l 82)(The date displayed on the date list will be the one on which you started Endless LoopRecording.)[ON]: Records sound.[OFF]: Recording of sound is off.: [RECORD SETUP] # [Sound In Loop Recording] # [ON] or [OFF]MENUHC-V550HC-V250
