- 169 -Using [Baby Monitor]≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 191 to 194).1 Press Wi-Fi button on this unit.2 Touch [Baby Monitor] on the Wi-Fi menu screen.≥ The SSID of the wireless access point to which this unit is connected is displayed.3 Connect the smartphone to a wireless access point.≥ To connect it, select the SSID of the wireless access point displayed on the screen of this unit.4 Start up the smartphone application “Image App”.≥ When this unit is connected to the Internet via the wireless access point, the notification function,which sends notifications from this unit to the smartphone, becomes available.≥ When the connection to this unit is complete, the screen of this unit turns off. To turn on thescreen again, touch the screen.To exit [Baby Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.∫ Checking on the baby in your houseYou can check the image of the baby being monitored on your smartphone.≥ Images of baby-monitoring cannot be recorded.≥ It cannot be confirmed with multiple smartphones simultaneously.∫ Voice message functionThe smartphone and this unit can be used like radio transceivers, allowing the users to have aconversation by taking turns.≥ A voice message of up to 1 minute can be sent.≥ Open the LCD monitor of this unit when using the Voice message function.∫ Sending notifications to your smartphoneIn the following cases, this unit sends a notification to the smartphone:≥ When baby monitoring starts≥ When a sound is detected∫ Sound detectionWhen this unit detects a sound, it can automatically send a notification to the connectedsmartphone.≥ This function can be used only if this unit is connected to the Internet via the wireless accesspoint when [Baby Monitor] is used.≥ Depending on [Sound Detection Sensitivity] setting and recording conditions, sounds may not bedetected. Test the sound detection function in advance to check if sounds can be detected andnotified.What you can do with [Baby Monitor]
