- 197 -If the Wi-Fi connection cannot be established≥ Please refer to the operating instruction of the device in use for details about the setting of thewireless access point or smartphone.Problem Check pointsIt cannot connect to thewireless access point.The wireless access pointis not detected.(General)≥ Turn ON the wireless access point.≥ Approach the wireless access point and reconnect.≥ If it takes time to complete the connection, the Wi-Ficonnection will be aborted.Reset the connection settings.≥ Check how to connect to the wireless access point and howto set the security settings.≥ If the wireless access point supports both the 2.4 GHz bandand the 5 GHz band, check if the setting for the 2.4 GHz bandis enabled.≥ Make sure the wireless access point is registered in this unit.(l 199)≥ The device may be unable to locate the wireless access pointdue to problems with the signal. Refer to “Setting up aconnection manually”. (l 193)([Easy Connection (WPS)])≥ Make sure the wireless access point is in the correct WPSstandby mode.≥ Make sure the PIN code has been correctly input.([Search] or [Set Manually])≥ Make sure the SSID and password have been correctly input.≥ Check the Authentication method, Encryption type, andEncryption key (Password).Radio waves of thewireless access point getdisconnected.≥ The condition may improved by moving the location orchanging the angle of the wireless access point.≥ If you use another 2.4 GHz band device such as a microwaveoven or cordless telephone nearby, you may interrupt thesignal. Keep a sufficient distance from these types of devices.
