- 192 -Enter a PIN code to set the Wi-Fi connection1 Touch [PIN code] in Step 6.2 Touch the wireless access point to be connected.≥ If you touch [Refresh], you can search for wireless access points again.≥ If you touch and select a wireless access point, all characters will be displayed. In thiscase, touch [OK].3 Enter the PIN code displayed on this unit screen into the wireless accesspoint.≥ For further details, please read the operating instructions for the wireless access point. (Whenusing a tethering connection, please read the operating instructions for the smartphone.)4 Touch [NEXT].≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set WirelessAccess Point].≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connectionagain.≥ Confirm Encryption key (Password) of the selected wireless access point if the networkauthentication is encrypted.1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup].3 Touch [Set Wireless Access Point].4 Touch the part with no display of a wirelessaccess point C.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Set Wireless Access Point] on page 199.5 Touch [Search].6 Touch the wireless access point to connect.≥ If you touch [Refresh], you can search for wireless accesspoints again.≥ If you touch and select a wireless access point, all characters will be displayed. In thiscase, touch [OK].≥ When no wireless access points are displayed, refer to “Setting up a connection manually”.(l 193)≥ If an Encryption key (Password) is not set, the connection is complete and a message isdisplayed. Touch [EXIT], and exit [Set Wireless Access Point].Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenSearching for wireless access points to set up a connectionA [Delete]B [EXIT]
