- 72 -≥ Change the Recording Mode to . (l 59)1 Press the button to record the still pictures. (l 31)2 Touch [Enter].≥ A still picture will be recorded, and it will be displayed in a semi-transparent state on the recordingscreen. Look at the picture to estimate how far you should move the subject for the nextrecording.≥ If you have already recorded still pictures in the recording group, the last still picture will bedisplayed in a semi-transparent state on the recording screen.≥ To record again, touch and record again.3 Move the subject and determine the composition of the picture.≥ Repeat Steps 1-3 to continue recording.≥ You can save still pictures in the same recording group until you use [Create Stop Motion].Creating a new recording group≥ If you touch [YES], a new recording group will be created and the recording screen will bedisplayed.≥ Once you create a recording group, you cannot save still pictures in any of the older recordinggroups.≥ [PICTURE SIZE] is set to (1920k1080).≥ (For the / / )When you want to record still pictures in a separate recording group, use a different SD card.≥ (For the / )When you want to record still pictures in a separate recording group, change the recording mediaor use a different SD card.≥ For details on playback of the Stop Motion Animation Assist Mode, refer to page 128.Stop Motion Animation AssistBefore recording in Stop Motion Animation Assist ModeYou can create a slideshow that appears to be moving by recording the subject while moved alittle at a time.≥ Each recording group can store up to 999 still pictures recorded in Stop Motion AnimationAssist Mode.≥ (For the / )Recording groups for the SD card and the built-in memory are created separately.: [PICTURE] # [Create Stop Motion]WXF990M VX980MMENU2.1MWXF990 VXF990 VX980WXF990M VX980M
