100VQT2N563 Operate with the remote control for the TV.1) Press the button up, down, left or right to select a scene or still picture to be played back,and then press the button in the centre to set it.2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.A Operation iconsB Display operation iconsC Cancel operation iconsD Display/Cancel operation icons≥ The following operations are available by pressing the colour buttons on the remote control.j Green: Switching the number of scenes/still pictures in thumbnail display(9 thumbnails > 20 thumbnails > 9 thumbnails...)Zoom in on still picturej Yellow: Deleting scenes/still picturesj Red: Zoom out from still picture∫ Other linked operationsTurning the power off:If you use the remote control for the TV to turn off the power, the power on this unit also turns off.Automatic input switching:If you connect with a HDMI mini cable and then turn on the power on this unit, the input channelon the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it willturn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).≥ Depending on the HDMI terminal on the TV, the input channel may not switchautomatically. In this case, use the remote control for the TV to switch the input channel.≥ If you are unsure whether or not the TV and AV amplifier you are using are compatible withVIERA Link, read the operating instructions for the devices.≥ Available linked operations between this unit and a Panasonic TV is different depending onthe types of Panasonic TVs even if they are compatible with VIERA Link. Refer to theoperating instructions of the TV for the operations that support on the TV.≥ Operation is not possible with a cable that is not based on the HDMI standard. 1) 2)
