98VQT2N56Select the desired method of HDMI output.≥ [AUTO] determines the output resolution automatically based on information from theconnected TV.If the images are not output on the TV when the setting is [AUTO], switch to the method[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Pleaseread the operating instructions for the TV.)≥ Image will not display on TV for a few seconds in the following cases.j When the 1080/50p recording mode is turned on/off during motion picture recording modej When [CHANGE VIDEO] is touched during Motion Picture Playback ModeYou still can listen to the 5.1 channel sound recorded from the internal microphones when thisunit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable.Please read the AV amplifier and TV operating instructions for how to connect this unit to theAV amplifier and TV.≥ If you connect this unit to a Panasonic AV amplifier and Panasonic TV that are compatiblewith VIERA Link, linked operations (VIERA Link) become possible. (l 99)≥ Audio recorded when [MIC SETUP] is set to [STEREO MIC] or recoded from an externalmicrophone is in stereo (2 ch).AV multi connector output setting can be changed.Changing the component output settingConnecting with a HDMI mini cable: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]Listening in 5.1 channel soundConnecting with the AV multi cable: [SETUP] # [AV MULTI] # desired setting[COMPONENT]: When connecting to the component terminal[AV OUT]: When connecting to the video terminal: [SETUP] # [COMPONENT OUT] # desired setting[576i]: When connecting to the component terminal on the TV compatible with 576i.(Playback is in standard quality.)[1080i]: When connecting to the component terminal on the TV compatible with 1080i.(Playback is in high definition quality.)
