101VQT2N56Copy/DubbingWith this unit/otherproducts1 Copying between SD card andBuilt-in Memory/HDD[HDC-TM700/HDC-HS700]Motion pictures or still pictures recorded with this unit can be copied between an SD cardinserted in this unit and a built-in memory/HDD.∫ Confirming remaining capacity on the copy destination[MEDIA STATUS] (l 45) allows you to confirm how much capacity remains on the SD card,built-in memory or HDD.≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SDcards following the instruction on the screen. In this case, the last scene copied to an SDcard is automatically divided to fit the space on the SD card.≥ If you divide the scenes (l 89), and copy by scene selection, it is possible to copymatching the remaining capacity of the media, or only the necessary parts.≥ If there is not much remaining capacity in the SD card, a confirmation message asking tocopy after deleting all data on the SD card is displayed. Be aware that deleted data cannotbe restored.≥ Refer to page 102 for approximate time for copying.1 Change the mode to .≥ Use a sufficiently charged battery or the AC adaptor.2 Select the menu.≥ When there are relay-recorded scenes in the built-in memory, a message appears on thescreen. Touch [YES] and copy after combining relay recorded scenes to the SD card.(l 93)Copying: [COPY][ ] When copying from the built-in memory to the SD card[ ] When copying from the SD card to the built-in memory[ ] This will convert and copy the scenes recorded as 1080/50p scenes inthe built-in memory to the SD card as normal scenes.[ ] When copying from the HDD to the SD card[ ] When copying from the SD card to the HDD[ ] This will convert and copy the scenes recorded as 1080/50p scenes inthe HDD to the SD card as normal scenes.
