47VQT2N56BasicSetup3 Using with the remotecontrolSelect the menu.1 Power on/off button [ ]Power can be turned on/off when the LCDmonitor is opened or the viewfinder isextended.≥ Power cannot be turned on by the poweron/off button when 36 hours have passedafter the power is turned off. Press thepower button on the unit and turn thepower back on.≥ Power cannot be turned off when it isconnected to the PC or the DVD burner.2 Photoshot button [ ] *3 On-screen display button[EXT DISPLAY] (l 97)4 Playback operation buttons (l 34, 79)These buttons function in the same manneras the corresponding playback operationicon being displayed on screen.[Excluding skip playback. (l 79)]5 Delete button [ ] *6 Direction buttons [3,4,2,1]7 Zoom/volume/thumbnail displayswitch buttons [T, W, /VOL] *8 Recording start/stop button [START/STOP]*9 Date/time button [DATE/TIME] (l 40)10 Menu button [MENU] *11 OK button [OK]* means that these buttons function in thesame manner as the correspondingbuttons on the unit.: [SETUP] #[REMOTE CONTROL] # [ON]SEARCHSTILL ADV STILL ADVSEARCH/VOLDATE/TIMESTART/STOPEXT DISPLAYPLAYSTOPOKSKIP SKIPMENUPAUSE2346587910111 Remove the insulation sheet A before using.Replace a button-type battery1 While pressing the stopper B, pullout the battery holder.2 Set the button-type battery with its(i) mark facing upward and thenput the battery holder back in place.≥ When the button-type battery runsdown, replace it with a new battery(part number: CR2025). The batteryshould normally last about 1 year,however this depends on howfrequently the unit is used.
