111VQT3J56Managing the copied disc Connect this unit to the DVD burner and then touch [PLAY DISC]. ( 107) Formatting discsThis is for initializing DVD-RAM, DVD-RW and +RW discs.Please be aware that if a disc is formatted, then all the data recorded on the disc willbe erased. Back up important data on a PC etc. When formatting is complete, touch [EXIT] to exit the message screen. Connect this unit and the DVD burner to format discs.You may no longer be able to use the discs if you format them on another device such as aPC etc. Auto protectYou can protect (write protect) a DVD-RAM disc when copying motion pictures in highdefinition picture quality or DVD-RW disc when copying motion pictures or still pictures inhigh definition picture quality to the disc.1 Select the menu. If a disc that you copied to is inserted in another device without protecting it, a messagemay be displayed prompting you to format the disc. We recommend setting [AUTOPROTECT] to [ON] in order to prevent accidental deletion.2 Copy to the disc. ( 108) After copying, the disc is write protected.To release the disc protection Touch [EXIT] and close the message screen after the auto protection is released. Displaying disc informationInformation such as the type of recorded disc, the number of recorded scenes and whetheror not the disc is finalized is displayed. Touch [EXIT] to exit the information screen.: [DISC SETUP] [FORMAT DISC]: [DISC SETUP] [AUTO PROTECT] [ON]: [DISC SETUP] [CANCEL PROTECT]: [DISC SETUP] [DISC STATUS]MENUMENUMENUMENU
