127VQT3J56 To disconnect USB cable safelySelect the icon in task tray displayed on the PC, and then click [Eject PanasonicCamcorder]. Depending on your PC’s settings, this icon may not be displayed. Charging the battery by connecting it to different devicesWhen using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray discrecorder or Panasonic DVD recorder, the battery will charge. When connecting this unit to a PC for the first time, make sure to connect this unit tothe PC with this unit turned on. Insert the USB cable securely all the way. It will not operate properly if it is not inserted allthe way. Do not use any other USB cables except the supplied one. (Operation is not guaranteedwith any other USB cables.) Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder. During charging, the status indicator flashes. You cannot charge when the status indicator flashes rapidly, or when it does not light at all.Charge using the AC adaptor. ( 20) It will take 2 or 3 times longer to charge compared to when using the AC adaptor. If the status indicator flashes at a particularly fast or slow rate, refer to page 145.About the screen indication of the unit Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on orcard access icon ( ) appears on the unit screen.Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on orbuilt-in memory access icon ( ) appears on the unit screen. If the screen does not change when the unit is operated while connected to a PC,disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect thebattery and/or AC adaptor, wait approximately 1 minute again, and then turn the unitback on. (Data may be destroyed when above operation is performed while accessingthe SD card or built-in memory.)HDC-TM90
