85VQT3J56Highlight PlaybackPart that was recognized as clearly recorded is extracted from a long recording, and it can beplayed back in a short time with effects and music added. Highlight playback cannot be used for iFramescenes.1 Touch . ( 26)2 (Only when you would like to change the settings)Touch [SET] to select the item to change.3 Touch [START]. When the [SCENE SETUP] is not changed in step 2, it will play back with the last recordeddate.4 Select the playback operation. ( 36, 80) When the playback is finished or stopped, the screen to select [REPLAY],[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item. Playing back of all the scenes returns if the unit is turned off or the mode is changed. Slow-motion playback, frame-by-frame playback, and direct playback bar operation are notpossible. Scene setting1 Touch [SELECT SCENES] or [SELECT DATE].2 (When [SELECT SCENES] is selected)Touch the scenes to be played back. Up to 99 scenes can be selected in succession. When touched, the scene is selected and isdisplayed. Touch the scene again to cancel theoperation.(When [SELECT DATE] is selected)Touch the date to be played back. A maximum of 7 days can be selected. When touched, the date is selected and surroundedby red. Touch the date again to cancel the operation.3 Touch [Enter]/[ENTER].[SCENE SETUP]: Select the scene or date to be played back.[PRIORITY SETUP]: Select the target to give priority to play back. ( 86)[PLAYBACK TIME]: Select the time to play back. ( 86)[EFFECT SETUP]: Select the effect for playback. ( 86)[MUSIC SELECT]: Select the music to be played on playback. ( 87)ALL
