115VQT3J56 Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV multi cable. Images are dubbed in standard quality. Use the AC adaptor to free you from worrying about the battery running down.1 Connect this unit to a video device and then change the mode to.2 Start playback on this unit.3 Start recording on the connected device. To stop recording (dubbing), stop playback on this unit after stopping recording on therecorder. If the date and time display and function indication are not wanted, cancel them beforedubbing. ( 41, 98)Dubbing in standard picture qualityIf the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or readthe operating instructions of the wide-screen TV and set the aspect ratio to 16:9.AV MULTIChange the video input on the videodevice and TV that this unit isconnected to. The channel set will differ depending on theterminal to which the unit is connected. See the operating instructions of the videodevice for details. Insert the plugs as far as they will go. Do not use any other AV multi cables exceptthe supplied one. AV multi cable (supplied)
