194 Menu : Menu Description TablesThe ____ in the Adjustable Range column indicates thepreset mode.OPTION MENUOPTIONItems/Data SavedAdjustableRange RemarksENGSECURITYONOFFSelect whether or not to prohibit openingthe menu screen.ON: Menu screen cannot be opened.Please consult your distributor torelease the setting.OFF: Menu screen can be opened.– – – – –FRAME RATEUBFRM RATEMENUFor setting the user bits to record whenthe video system is set to 24P or 24PA.For details, refer to [Recording time codeand user bits ] (page 58).FRM RATE:For recording the shooting information(frame rate etc.) of the camera.MENU: This follows the settings in theUB MODE item and the VITCUB MODE item of screen. However, the camerarecording information is alwaysrecorded when recording inNative mode.– C – – –1394 CONFIG DFLT(000)001:255This is the menu for expanding theDVCPRO connector.Use with DFLT in normal operation.– C – – –1394 GAPCOUNT0:40:63For setting the interval between packets.– C – – –AUDIO OUTDELAYDELAYEDTHROUGHSelect whether or not to delay audio,headphone and speaker outputs.DELAYED:Delay audio output in synchronisationwith video output.THROUGH:Output audio input without delay. Thissetting prevents echo effect betweenthe sound source and audio outputwhen the sound source is near thecamera-recorder.– C – – –FAN MODE OFFAUTOFor setting the operation mode of the fanOFF: The fan always stops.AUTO:The fan will run automaticallywhen the temperature in the unitincreases.NoteOnce the power is turned off, this willalways be set to "AUTO" whenever thepower is turned on. If the unit isoperated as the fan stops, thetemperature in the unit will increase, anddata may not record or play backproperly. Use the unit after setting thisitem to "AUTO" for normal operation.– – – – –AREA SETTINGItems/Data SavedAdjustableRange RemarksAREASELECTNTSCNTSC (J)PALNTSC: Any NTSC color TVstandard other than Japan isselected.NTSC (J): Japan color TV standard isselected.PAL: PAL color TV standard isselected.– – – – –AREA SET The settings for the area selected in theAREA SELECT item are applied. Fordetails, refer to [ Color TV StandardSettings (Settings for frame frequency) ](page 13).– C – – –
