Panasonic HPX3000 Manual

30 Recording and Playback P2 CardsNoteWhen using the camera-recorder for the first time, be sureto set the time data beforehand. On how the time data isset, see [ Setting Time Data ] (page 57).1 Turn on the POWER switch.2 While pressing down the slide lock button, slide theslide-out door to the left.The door opens.3 Insert a P2 card into the P2 card slot until the EJECTbutton pops up.4 Tilt up the popped-up EJECT button, to lock-in the P2card.5 Insert a P2 card into camera-recorder. The P2 CARDACCESS LED for the appropriate slot indicates thestatus of the P2 card.For how the P2 card status is indicated, see [P2CARD ACCESS LED and status of P2 cards] (page31).6 Close the slide-out door.NoteDo not leave the slide-out door open when movingcamera-recorder.Inserting P2 CardsPOWER: ONSlide lockbuttonSlide-out doorEJECT buttonThe card must beinserted with thelogo right wayup.P2 CARDACCESSLEDRecording and PlaybackP2 Cards