Panasonic HPX3000 Manual

132 Manipulating Clips with Thumbnails : Properties3 Press the SET buttonThe input window (soft keyboard) for modifyingmetadata is displayed. Use the keyboard to modifythe metadata.The keyboard operation is the same as [ Checking andmodifying read metadata ] (page 126).4 Press OK on the keyboard to write the modifiedmetadata on the clip and return to the metadatawindow.The input window (soft keyboard) for modifyingmetadata is displayed. Use the keyboard to modifythe metadata.Notez Deleting only the respective items of LOCATION(recording location data) in SHOOT is not possible. Bysetting ALTITUDE to empty, other LONGITUDE/LATITUDE items are collectively deleted.z The metadata for a clip with the incomplete clipindicator cannot be modified. For the clips recorded onmultiple P2 cards, modify the metadata while all P2cards are inserted.z Any MEMO with 100 characters or more cannot bemodified.Select PROPERTY > CARD STATUS from the thumbnailmenu to set the desired indication mode (remaining freespace or used memory capacity) for the P2 card statusdisplay.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Press the MENU button and select PROPERTYPROPERTY SETUP P2 CARD CAP from thethumbnail menu.The following screen appears. Select the P2 cardstatus display settings from the P2 CARD CAP menuoption.REMAIN:Show remaining free space on the P2 card as the P2card status display. (Factory setting)USED:Show used memory capacity on the P2 card as theP2 card status display.P2 Card Status DisplayP2 Card Status Display Settings