- 31 -“LUMIX CLUB” settingsIf you intend to broadcast a live motion picture or use WEB services with an iOS device, you arerequired to register “LUMIX CLUB” and WEB services you use because uploading or livebroadcasting is done via “LUMIX CLUB”.Perform service user registration (free of charge) for the “LUMIX CLUB”, acquire a login ID, and setthe registered content on this unit.1 When this unit and a smartphone are connected directly (l 17), turnoff the Wi-Fi setting of the smartphone to make the internetconnection available.≥ When using an access point connection (l 41), proceed to step 2.2 Tap # [Playback settings] # [LUMIX CLUB settings] # [StartLUMIX CLUB function use] on the Image App screen to set ON.≥ If a login ID for the “LUMIX CLUB” has already been acquired on a PC, etc., the acquired login IDcan also be used.3 Tap [Sign up].4 Read through the [LUMIX CLUB] terms of use, and tap [Agree].5 Enter the password on the next screen. # Tap [Register].≥ After the login, complete the registration according to the on-screen instructions. (When using anaccess point connection (l 41), step 6 is not required.)6 Close (or hide) the Image App, turn on the Wi-Fi setting, and connectthis unit and smartphone. (l 17)Check the following site for supported WEB services.http://lumixclub.panasonic.net/eng/c/1 When this unit and a smartphone are connected directly (l 17), turnoff the Wi-Fi setting of the smartphone to make the internetconnection available.≥ When using an access point connection (l 41), proceed to step 2.2 Acquire login information (login ID, password, etc.) on the WEBservice you want to use.3 Tap # [Playback settings] # [LUMIX CLUB settings] # [Regist.WEB Service] # any WEB services you want to use on the ImageApp screen, enter the login information acquired in Step2 and thencomplete the registration.≥ Follow on-screen instructions to register.Registering “LUMIX CLUB”Registering WEB services