Panasonic HX-A100D Owner's Manual

Also see for HX-A100: Basic owner's manual Basic operating instructions How to upgrade firmware Firmware upgrade

Contents

Panasonic HX-A100D Owner's Manual Manual pdf 40 page image

- 40 -Performing a live broadcastPress the Wi-Fi/WPS button continuously to changethe Wi-Fi mode lamp to [ ].≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed.≥ A live broadcast starts.≥ If [E-mail Setup] is enabled, a broadcast notification e-mail is sent to theaddresses that have been set.∫ To stop a live broadcastPress the Wi-Fi/WPS button, and turn off the Wi-Fi mode lamp.≥ If recording is taking place on this unit during a live broadcast, the live broadcast cannot bestopped. Stop the motion picture recording in advance.∫ About live broadcast imagesYou can record live broadcast images by pressing the recording start/stop button.≥ The Image App cannot be used connecting with this unit in Live broadcast mode. Access the URLof the live broadcast to check the image.∫ When the Wi-Fi mode lamp [ ] is flashing fast (flashing at anapproximate interval of 0.5 second)A live broadcast cannot be started.≥ In the following cases, live broadcasting is not available.j When the recording mode is set to [1920k1080/60p] or [1280k720/60p]j When in [Slow motion mode]j While recording a motion picturej When in [Interval rec mode]j When the date setting is out of sync by a day or morej When two cameras simultaneously perform live broadcasts at the same account (The camerathat has started the broadcast first will be disconnected from the broadcast)≥ When settings for live broadcasts are completed and [E-mail Setup ] in [Live mode settings] isset, a live broadcast starts and a notification e-mail is sent to all registered e-mailaddresses each time the Wi-Fi mode lamp [ ] lights up. When not sending, set to OFF.≥ When you cannot view and listen to a broadcast using the USTREAM application of a televisionor a smartphone, the password of a distribution program is canceled. Please rebroadcast.≥ If a live broadcast motion picture is saved on the “USTREAM” side, the file name will be the sameas the channel name.≥ The live broadcast stops as the elapsed broadcast time exceeds 8 hours 30 minutes, and then itstarts again. (A separate file will be saved on the “USTREAM” side.)