Panasonic HX-A100D Owner's Manual

Also see for HX-A100: Basic owner's manual Basic operating instructions How to upgrade firmware Firmware upgrade

Contents

Panasonic HX-A100D Owner's Manual Manual pdf 42 page image

- 42 -Enter SSID (Wireless network name) and password of your access point to connect this unit to theaccess point.1 Check the SSID and password of your access point.≥ The SSID and password of the access point (e.g. a wireless broadband router) you use aredescribed on the access point device or in its manual. For details, refer to the access pointmanual.2 Tap # [Camera Wi-Fi settings] # [AP mode setup] # [Setconnect. dest.] on the Image App screen and enter the SSID andpassword of your access point (Step1).3 Press the Wi-Fi/WPS button continuously to changethe Wi-Fi mode lamp to [ ].≥ The Wi-Fi mode lamp [ ] flashes.≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed.2 Connecting this unit and a device on the network1 Connect a smartphone or a DLNA-compatible device to the accesspoint.≥ Connect with an SSID connection or a WPS connection. For information on the connectionmethod, refer to the operating instructions for your device or access point.2 When connecting to the smartphoneFrom the Image App, tap # [Set connect. dest.], and tap thisunit from the connection destination list.≥ When the connection is complete, control this unit from the Image App.When connecting with a DLNA-compatible deviceOn the DLNA device, select this unit from the list of devices that areconnected to the access point.≥ Refer to the operating instructions of your DLNA-compatible device.≥ Refer to page 43 for how to play back on a DLNA-compatible TV.≥ An access point connection cannot be started during motion picture recording.≥ If you remove the microSD card while this unit is in playback mode, Wi-Fi mode will turn off andthis unit will lose the connection to the access point.≥ To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi modelamp.Entering SSID to connect to an access pointPreparation: Connect this unit with the smartphone. (l 17)