Panasonic KT9 Instruction Manual

Also see for KT9: Instruction manual

Contents

Panasonic KT9 Instruction Manual Manual pdf 27 page image

27Energized/Deenergized functionThis function is not available for the Heater burnout alarm (optional).[If the alarm action Energized is selected]When the alarm output indicator is lit, the alarm output (terminals 7-8 or 12-13) isconducted (ON). When the alarm output indicator is unlit, the alarm output is notconducted (OFF). See (Fig. 5.6-1).[If the alarm action Deenergized is selected]When the alarm output indicator is lit, the alarm output (terminals 7-8 or 12-13) is notconducted (OFF). When the alarm output indicator is unlit, the alarm output isconducted (ON). See (Fig. 5.6-2).High limit alarm (When Energized is set) High limit alarm (When Deenergized is set)(Fig. 5.6-1) (Fig. 5.6-2)5.7 Control output OFF functionControl output OFF function [ ]• A function to pause the control action or turn the control output of the unusedinstrument of the plural units OFF even if the power to the instrument is supplied.[ ] is indicated on the PV display while the function is working.• Once the Control output OFF function is enabled, the function cannot be releasedeven if the power to the instrument is turned OFF and ON again.To cancel the function, press the key again for approx. 1 second.5.8 Auto/Manual control functionPV/SV displaymode(Manual control)• To use this function, it is necessary to select Auto/Manualcontrol function during the OUT/OFF key function selection.• First, press the key.The MV (manipulated variable) on the SV display can beincreased or decreased by pressing the or keyand the control is performed.• The 1st decimal point from the right on the SV display flashes.• By pressing the key again, the mode reverts to thePV/SV display (automatic control) mode.(When the power supply to the instrument is turned on,automatic control starts)OFFONA1 hysteresisSV setting + A1 set pointOFFONSV setting + A1 set pointA1 hysteresis