Panasonic KT9 Instruction Manual

Also see for KT9: Instruction manual

Contents

Panasonic KT9 Instruction Manual Manual pdf 7 page image

71.2 Rated inputInput type Input range Resolution–200 to 1370 –320 to 2500 1 ( )K –199.9 to 400.0 –199.9 to 750.0 0.1 ( )J –200 to 1000 –320 to 1800 1 ( )R 0 to 1760 0 to 3200 1 ( )S 0 to 1760 0 to 3200 1 ( )B 0 to 1820 0 to 3300 1 ( )E –200 to 800 –320 to 1500 1 ( )T –199.9 to 400.0 –199.9 to 750.0 0.1 ( )N –200 to 1300 –320 to 2300 1 ( )PL- 0 to 1390 0 to 2500 1 ( )C(W/Re5-26) 0 to 2315 0 to 4200 1 ( )–199.9 to 850.0 –199.9 to 999.9 0.1 ( )Pt100 –200 to 850 –300 to 1500 1 ( )–199.9 to 500.0 –199.9 to 900.0 0.1 ( )JPt100 –200 to 500 –300 to 900 1 ( )4 to 20mA DC –1999 to 9999 *1, *2 10 to 20mA DC –1999 to 9999 *1, *2 10 to 1V DC –1999 to 9999 *1 10 to 10V DC –1999 to 9999 *1 11 to 5V DC –1999 to 9999 *1 10 to 5V DC –1999 to 9999 *1 1*1: For DC input, the input range and decimal point place can be changed.*2: For DC current input, 50 shunt resistor (AKT4810, sold separately) must beconnected between input terminals.1.3 How to read the rated labelThe rated label is attached to the case.A K T 9 1 1 1 1 0 0 1No.Relay contact outputA1 outputHeater burnout alarm is not added.(1)(2)(e.g.)Supply voltage: 100 to 240V ACMulti-input(1) Model number, supply voltage, input type, output type, etc. are entered.(2) Lot number is entered.Heating/Cooling control is not added.Serial communication is added.