6*1 Auxiliary mark [LEAD] [LAG] indicates the phase difference between voltage and current.When current phase delays to voltage phase, [LAG] is indicated.When current phase leads to voltage phase, [LEAD] is indicated.When power factor is ‘1’, ‘0’ and ‘-1’, it doesn’t display [LEAD] nor [LAG].2.2 Key’s functionsKey FunctionsMeasuring mode Shift to setting modeSetting mode Shift to setting confirmation mode and measuring modeLogging modeDemand mode Shift to setting modeSetting mode Set setting items and setting valuesMeasuring mode Shift to measuring itemLogging mode Select logging item to display(continuous 3-sec)Measuring modeLogging modeDemand modeAll keys lockedLock mode Release the lock mode▽>- △>Measuring mode Select measuring item to displaySetting mode Select a setting valueLogging mode Select logging item to displayDemand mode Select demand item to display+▽>Measuring mode Select measuring item to displayLogging mode Select logging item to displayDemand mode Select demand item to display+▽>Measuring mode Shift to logging modeLogging mode Shift to demand modeDemand mode Shift to measuring mode+
- △>Measuring mode Select measuring item to displayLogging mode Select logging item to displayDemand mode Select demand item to display●Lock modeIt is the mode makes all keys unable. In this mode, you can not input by any keys.When you press continuously for about 3sec., lock mark is displayed.Press continuously for about 3sec. again to release Lock mode.When it set to use auto-display functions, the display items are changed automatically.Refer to 4.4.3 setting for optional functions for auto-display functions.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
