856.2.21 Pulse Input Value・The present pulse input value is displayed.・Press ▽> to change CNT1, CNT2.CNT1 is not displayed when CNT1 is set to [Clock] (clock correction).・Pulse input status (ON or OFF) is confirmed via communication. (MEWTOCOL and MODBUS)Pulse input 1 Pulse input 2*Turn on the unit during IN1 or IN2 is shorted, first 1-pulse is not counted and it doesn’t light on [IN1][IN2]. After that, when pulse is input pulse it count the pulse.6.2.22 Conversion value for integral active power・The conversion value for the present integral active power (P) is displayed.(Only total conversion value is displayed for 3P3W system.)・Press ▽> to change total, phase 1 (1st circuit), phase 2 (2nd circuit) and phase 3 (3rd circuit).・Press to change the display with each time-zone.After changing, press to change displayed time-zone.time-zone1(T1) →time-zone2(T2) →time-zone3(T3) →time-zone4(T4) →All time-zone*Time-zone without setting for any time program is not displayed.<1P2W/1P3W/3P4W>All time-zoneTotal Phase 1 (1 st circuit) Phase 2 (2nd circuit) Phase 3 (3rd circuit)time-zone1time-zone2, time-zone3, time-zone4 and all time-zone are changed in turn.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
