Panasonic KX-A406 Installation Manual

Also see for KX-A406: Quick start guide Quick start guide Installation guide How-to

Contents

NoteR The repeater’s Site Survey mode works independently from the CS. This means that the CS does nothave to be placed into Site Survey mode.R When using more than 1 repeater in Site Survey mode simultaneously, please ensure repeaters areset to different channels.1 While pressing and holding down the PROGRAM button, turn on the repeater by connecting the ACadaptor.The STATUS indicator will flash red.2 Continue to hold down the PROGRAM button for 5 seconds.The STATUS indicator will flash red quickly.NoteIf you continue to hold down the PROGRAM button for 10 seconds, the repeater will enterDe-registration mode.3 Release the PROGRAM button.The STATUS indicator will flash red to indicate the current channel number, and a carrier sense willstart to check whether the current channel is available (idle) or not.4 If the current channel is available, the STATUS indicator will change to flash green.Site Survey mode on the current channel is now operational.NoteA carrier sense is performed regularly in Site Survey mode. If the selected channel is not available(busy), the STATUS indicator will flash red to indicate the channel number and the repeater will stoptransmitting.5 Activate the site survey function on the PS to measure the radio signal strength level. The repeaterCSID is 1234567890.NoteR It is recommended that the radio signal strength level is "03" or greater.R For details about using the PS during a site survey, refer to the appropriate documentation for theCS.6 To change the site survey channel, press the PROGRAM button.The channel number will change by one each time the PROGRAM button is pressed.7 To turn off Site Survey mode, turn off the repeater by disconnecting the AC adaptor, and then turn onthe repeater by connecting the AC adaptor.TroubleshootingPROBLEM PROBABLE CAUSE SOLUTIONR The repeater doesnot turn on.R The AC adaptor is notconnected properly.R Make sure that the AC adaptor is properlyconnected to both the repeater and the ACoutlet.191. Linking to Cell Stations