Panasonic KX-CL500 Setup Manual

Also see for Jetwriter KX-CL500: Specifications Operating instructions User guide

Setup15NOTE:• If you do not have a (Bidirectional) parallel interfacecable or USB cable, you may need to purchase one.(A) When using a parallel interface cable:NOTE:• Use a shielded cable 2.0 m (6.6 ft.) or less in length.(B) When using the USB interface cable:NOTE:• Use a shielded cable 5.0 m (16.4 ft.) or less in length.• Windows 98, Windows Me, Windows 2000,Windows XP, Mac OS 8.6, 9.0, 9.1, 9.2 or Mac OS X10.1, 10.2 is required for a USB connection.(C) When using the network interface cable:NOTE:• Use category 5 shielded twisted pair cable with RJ-45connectors.• Do not connect other connectors than 100Base-TX /10Base-T. Excessive current flow may cause damage ofthe unit.1 Connect the interface cable to the printer.2 Connect the other end of the interface cable to thecomputer.3 Connect the power cord to the printer.1 Pull the media tray (1) out of the printer while slightlyraising its front portion and remove the tray pad (2).CAUTION:• Be sure to hold the media tray with both hands so youdo not drop it.NOTE:• When the tray cover is opened or the multi-purpose trayis used, you cannot pull the media tray out of the printer.Be sure to push the multi-purpose tray and close thetray cover before you pull the media tray out of theprinter or open the front door.Connecting the Printer to aComputerPower cord(A) Parallel interface(B) USB interface(C) Networkinterface132ComputerLoading Media in the MediaTrayMedia Type Media Weight Media SizePlain paperBond/LetterheadRecycled paper75 -105 g/m 2(20 -28 lb.) Letter, Legal, A4,B5 (JIS)Thin paper 60 -75 g/m2(16 - 20 lb.)12Setup