Panasonic KX-CL500 Setup Manual

Also see for Jetwriter KX-CL500: Specifications Operating instructions User guide

Setup216-D (For Windows XP)(1) Click on the Install from a list or specific location(Advanced) check button and click [Next>].(2) Click on the Search for the best driver in theselocations check button and Include this location inthe search check box and remove the check mark ofthe Search removable media (floppy, CD-ROM...)check box and click [Browse].(3) Select PCL folder [D (CD-ROM driveletter):\WinXP\ENGLISH\PCL] or PS folder [D (CD-ROM drive letter):\WinXP\ENGLISH\PS]. Click [OK].(4) Click [Next>].(5) If the Hardware Installation window is displayed, click[Continue Anyway].(6) Click [Finish].(7) Proceed to step 7 on page 21.7 To install utilities software, double click My computericon, then double click the drive (example D:) for CD-ROM.The Panasonic Setup window is displayed.8 Click Automated Printer Setup.9 If the Purchase Information window is displayed,select the shop where you purchased the printer andclick [Next >].• If you cannot find the shop where you purchasedthe printer, select Other and click [Next >].The License Agreement window is displayed.10 Click [Yes].The Select Printer window is displayed.NOTE:• If you cannot find the printer on your network, theWarning message will be displayed. Click [OK] tocontinue.11 Click on the Choose the current port myself (LPT /USB) check button and click [Next>].The Select Printer Port window is displayed.12 Click on the USB port (Ex. USB001) and click[Next >].The Installed Device window is displayed.13 Click on check box of the installed options in yourprinter, then click [Next >].The Installer starts installing the Printer Driver andUtilities by this condition.Follow the instruction on the screen to complete theinstallation.The InstallShield Wizard Complete window isdisplayed.14 Click [Finish].Setup