30Sending FaxesDocuments you can send!600 mm(235⁄8")Minimum size128 mm(5")128 mm(5")Maximum size216 mm(8 1 ⁄ 2")Paper width208 mm (83⁄16" )Effective scanning area4 mm 4 mm2 mm2 mmScannedarea216 mm (8 1⁄ 2")Document weightSingle sheet:45 g/m 2 to 90 g/m2(12 lb. to 24 lb.)Multiple sheets:60 g/m 2 to 75 g/m2(16 lb. to 20 lb.)Note:l Remove clips, staples or other similar fasteners.l Check that ink, paste or correction fluid has dried.l Do not send the following types of documents. Use copies for fax transmission.— Chemically treated paper such as carbon or carbonless duplicating paper— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)— Electrostatically charged paper— Badly curled, creased or torn paper— Paper with a coated surface— Paper with a faint imagel To transmit the document(s) whose width is less than the letter size (216 mm) or A4 size (210 mm), werecommend using a copier machine. Copy the original document on to a letter size paper, then transmitthe copied document.To transmit more than 15 pages at a timel Insert the first 15 pages of the document. Add the other pages (15 at a time) before the last page is fedinto the unit.Sending reportThis report will provide you with a printed record of transmission results. For the communicationmessage in the result column, see page 56. To use this feature, activate feature #04 (p. 50).Journal reportThe unit stores the 30 most recent fax communication results. For the communication messagein the result column, see page 56. When a new communication occurs, the oldestcommunication result will be erased.— To print manually, see page 69.— To print automatically after every 30 new fax communications, activate feature #22 (p. 52).Reports for confirmation!