Panasonic KX-FHD301 Operating Instructions Manual

Also see for KX-FHD301: Operating instructions Service manual

Contents

“ON”: The unit will print the journalreport automatically after every 30new fax communications (p. 30).Features Summary52Advanced features!How to set menu optionsProgramming tableCode#22Setting the journal report to printautomaticallyAUTO JOURNALMODE=ON [±]ONOFFTo send a document:1. Insert the document.2. Follow steps 1 and 2 above.3. Press or to select “ON”.4. Press .5. Enter the fax number.6. Press .7. Enter the transmission start time.Press to select “AM” or “PM”.8. Press .9. Press .l To cancel after programming,press then .SETSTOPMENUSETSETSET“NEXT FAX”: This setting is effectiveonly for the next attempted faxtransmission. After transmission, theunit will return to the previous setting.“ERROR”: When the previous faxtransmission fails and you redialthe same number.l This feature is not available forbroadcast transmission.l The calling charge may be higher.#23Sending document overseasIf you have difficulty sending anoverseas fax, activate this featurebefore starting transmission. Thisfeature makes sending documentseasier as the transmission speed isslowed down.OVERSEAS MODEMODE=ERROR [±]Feature & Display Settings How the unit operates#25Sending a fax at a specified timeThis feature allows you to takeadvantage of low-cost calling hoursoffered by your telephonecompany.l The setting can be reserved totake place up to 24 hours inadvance.DELAYED SENDMODE=OFF [±]NEXT FAXERROROFFON /fax no. /hh:mmOFF(The default setting is in bold type.)Note:l Step 3 may be slightly different depending on thefeature.l See page 49 for more details.1. Press .2. Press or until the following isdisplayed.Display:Press and press or untilthe desired feature is displayed.SETADVANCED MODEPRESS SETMENU#26Setting the Caller ID list to printautomaticallyAUTO CALL. LISTMODE=ON [±]ONOFF“ON”: The unit will print the CallerID list automatically after every 30new calls (p. 26).3. Press or until the desired settingis displayed.4. Press .5. Press .MENUSET